Question: How Do I Load Photo Paper Into My HP Printer?

Pull out the paper tray and lift the paper catch, if one is present, and insert the picture paper glossy or matte side facing down if you have a HP printer that accepts paper from a front-load paper slot.

These printers are known as “Front Load” printers.

Insert 10 sheets of paper into the paper slot.

How do I load paper into my HP printer?

Open the paper tray door, pull out the paper tray, and then slide the paper width guides to their outermost positions. Load a stack of photo paper into the tray, with the short edge facing toward the product and the print side down. Push the stack into the tray until it stops.

How do I put 4×6 paper in my HP printer?

1:27

3:32

Suggested clip · 112 seconds

Loading Specialty Paper for the HP Deskjet | HP Deskjet – YouTube

YouTube

Start of suggested clip

End of suggested clip

What side up do you put photo paper in a printer?

Inside the paper tray you will see the sticker like an image shown below. The lines on the corner of the symbol (surrounded by a red border in the image) show that this is the side that the photo will print onto, and therefore it should be face down.

How do I print photos on my HP printer?

Suggested clip · 36 seconds

How To Print Photos from Windows 10 | HP Printers | HP – YouTube

YouTube

Start of suggested clip

End of suggested clip

How do I load paper into my HP OfficeJet 5255?

Load plain paper

  • Open the input tray door, and then pull it toward you to extend the input tray.
  • Slide out the paper width guides as far as possible.
  • Load a stack of paper in portrait orientation with the print side facing down.
  • Push the stack into the tray until it stops.

How do I load paper into my HP DeskJet 2636?

Load plain paper

  1. Raise the input tray.
  2. Slide the paper width guide all the way to the left.
  3. Load a stack of plain white paper into the input tray.
  4. Slide the paper width guide to the right until it rests at the edge of the paper.
  5. Lower the output tray, and then pull out the tray extender.

How do I change the paper settings on my HP printer?

Create a custom paper size directly from the printer properties menu.

  • Load the custom-size paper into the paper input tray.
  • Open the item you want to print.
  • Click File, and then click Print.
  • In the Print window, click Preferences, Properties, or Printer Properties.
  • Click the Paper/Quality tab, and then click Custom.

How do I print a 4×6 picture on my printer?

0:51

1:56

Suggested clip · 52 seconds

Printing Photos with Windows Photo Viewer | HP Printers | HP

YouTube

Start of suggested clip

End of suggested clip

How do I print postcards on my HP printer?

Click on the “Print” button in the menu bar, click “Print,” select the HP Deskjet printer from the “Printer” list and select the postcard size from the “Paper size” list. Select the paper type from the “Paper type” drop-down menu and select the “Full page photo” option from the scrolling menu on the right side.

Can you put photo paper in a normal printer?

Most modern computer printers have the option of using photo paper. This type of paper is made for printing high-quality photos from your personal printer. You can buy photo paper at any place that regular printer paper is sold, or from the manufacture of your printer.

How do I load photo paper into my Epson printer?

Loading Photo Paper in Cassette 1

  1. Close the output tray, if necessary.
  2. Pull out paper cassette 1.
  3. Slide the edge guides outward.
  4. Slide the edge guide shown below to your paper size.
  5. Load photo paper, printable side down, against the edge guide as shown.
  6. Slide the edge guides against the paper, but not too tight.
  7. Gently replace paper cassette 1.

How do you use photo paper in a printer?

To print a photo with HP Advanced Photo Paper, load the paper in the tray and set the paper size and print quality settings.

  • Load the photo paper into the input tray.
  • Open the photo that you want to print, and then click Print.
  • Under the Printer/Name section, click your printer name from the drop-down list.